the diameter of the cylinder at the lower end, and cut off a
piece the length of the cylinder proper, leaving the pivot projecting.
Now fill the cylinder with lathe wax, and while the wax is warm, slip on
the joint wire. You can now proceed to true up the pivot in the usual
manner, and when the wax is quite cold, proceed to turn and polish the
pivot before removing from the lathe. If the joint wire is properly
cemented on the cylinder, it is almost impossible to break it. After all
the work is done, the wax can be dissolved in alcohol. In pivoting
pinions to cylinder escape-wheels and third wheels, it is not necessary
to remove the wheels, but great care should be used in handling. In the
latter case use plenty of wax. Do all your centering by the outside of
the pinion. Perfect centering and sharp tools are requisite to good
pivoting. Do not try to rush your work, especially while drilling.
Proceed deliberately with your work and aim to restore the watch to the
condition it was in originally, and you will find staffing and pivoting
is not half as hard as some workmen would have you believe.
[Footnote A: POISING THE BALANCE, by J. L. Finn, Geo. K. Hazlitt & Co.,
publishers, Chicago.]
End of the Project Gutenberg EBook of A Treatise on Staff Making and Pivoting, by
Eugene E. Hall
*** END OF THIS PROJECT GUTENBERG EBOOK A TREATISE ON STAFF MAKING ***
***** This file should be named 20317.txt or 20317.zip *****
This and all associated files of various formats will be found in:
http://www.gutenberg.org/2/0/3/1/20317/
Produced by Sigal Alon, Chris Curnow, Fox in the Stars and
the Online Distributed Proofreading Team at
http://www.pgdp.net
Updated editions will replace the previous one--the old editions
will be renamed.
Creating the works from public domain print editions means that no
one owns a United States copyright in these works, so the Foundation
(and you!) can copy and distribute it in the United States without
permission and without paying copyright royalties. Special rules,
set forth in the General Terms of Use part of this license, apply to
copying and distributing Project Gutenberg-tm electronic works to
protect the PROJECT GUTENBERG-tm concept and trademark. Project
Gutenberg is a registered trademark, and may not be used if you
charge for the eBooks, unless you receive specific permission. If you
do not charge anything for copies of this eBook, complying with the
rules is very
|