hina or tin dishes usually found among
a child's collection of toys.

=The Sofa=

The comfortable little high-backed sofa (Fig. 92) is made of a long
envelope with the top left open. Fold the envelope into the box shape,
as for the bed, with the points turned up. Then fold the tips of the
points inward, as in Fig. 93. Now reverse the box and slit down the two
front edges which gives an opening in front. Bend down this front piece
and cut it off on a line with the two ends.

[Illustration: FIG. 93--Fold the tips of the points inward.]

=The Arm-Chair=

A deep, low-seated arm-chair can be made of an oblong envelope of
ordinary size by following the directions for the sofa and allowing the
back to curve instead of making it flat, then slitting down the sides
and bending them over to form the arms (Fig. 94).

[Illustration: FIG. 94--Make the arm-chair of an oblong envelope.]

=The Bath Tub.=

[Illustration: FIG. 95--A little bath tub for imaginary water.]

A little bath tub, but one that will scarcely hold water, is shown in
Fig. 95. In this the upper lap is left open, the points are bent
under, and the sides left to curve naturally. A baby carriage can also
be made in this way, but for the carriage the points must extend down
and have wheels drawn on them and the tips must be cut off squarely at
the bottom so that the carriage will stand. The lap is the back and the
handle in one (Fig. 96).

[Illustration: FIG. 96--A doll-baby can ride in this carriage.]

[Illustration: FIG. 97--The bungalow is made of a long envelope.]

=The Bungalow=

The little bungalow (Fig. 97) is something very different, yet it, too,
is made of an envelope. Though it appears to have many parts it is all
in one piece. The envelope is a long one, such as is used for legal
papers. Fig. 98 gives the pattern. The heavy lines show where to cut and
the dotted lines where to bend. The lap forms the front porch, but the
porch may be left off entirely if the envelope has been slit at the top
in opening it. With a little care, however, many envelopes can be opened
intact. Cut along the heavy lines of the door and windows, then open the
door and the little shutters. Bend back the ends of the house and in the
middle of each end take a little plait from top to bottom. This is to
make the ends narrower and give room for the roof to slant. Bend the
roof back from the eaves along the dotted line. The back of the bungalow
is made like the fron