[Illustration: FIG. 46.]

25. _Greatest Shear when concentrated Loads travel over the Bridge._--To
find the greatest shear with a set of concentrated loads at fixed
distances, let the loads advance from the left abutment, and let C be the
section at which the shear is required (fig. 44). The greatest shear at C
may occur with W_1 at C. If W_1 passes beyond C, the shear at C will
probably be greatest when W_2 is at C. Let R be the resultant of the loads
on the bridge when W_1 is at C. Then the reaction at B and shear at C is
Rn/l. Next let the loads advance a distance a so that W_2 comes to C. Then
the shear at C is R(n+a)/l-W_1, plus any reaction d at B, due to any
additional load which has come on the girder during the movement. The shear
will therefore be increased by bringing W_2 to C, if Ra/l+d > W_1 and d is
generally small and negligible. This result is modified if the action of
the load near the section is distributed to the bracing intersections by
rail and cross girders. In fig. 45 the action of W is distributed to A and
B by the flooring. Then the loads at A and B are W(p-x)/p and Wx/p. Now let
C (fig. 46) be the section at which the greatest shear is required, and let
the loads advance from the left till W_1 is at C. If R is the resultant of
the loads then on the girder, the reaction at B and shear at C is Rn/l. But
the shear may be greater when W_2 is at C. In that case the shear at C
becomes R(n+a)/l+d-W_1, if a > p, and R(n+a)/l+d-W_1a/p, if a < p. If we
neglect d, then the shear increases by moving W_2 to C, if Ra/l > W_1 in
the first case, and if Ra/l > W_1a/p in the second case.

[Illustration: FIG. 47.]

[Illustration: FIG. 48.]

26. _Greatest Bending Moment due to travelling concentrated Loads._--For
the greatest bending moment due to a travelling live load, let a load of w
per ft. run advance from the left abutment (fig. 47), and let its centre be
at x from the left abutment. The reaction at B is 2wx squared/l and the bending
moment at any section C, at m from the left abutment, is 2wx squared/(l-m)/l,
which increases as x increases till the span is covered. Hence, for uniform
travelling loads, the bending moments are greatest when the loading is
complete. In that case the loads on either side of C are proportional to m
and l-m. In the case of a series of travelling loads at fixed distances
apart passing over the girder from the left, let W_1, W_2 (fig. 48), at
distances x and x+a from the left abu