FREE BOOKS

Author's List




PREV.   NEXT  
|<   20   21   22   23   24   25   26   27   28   29   30   31   32   33   34   35   36   37   38   39   40   41   42   43   44  
45   46   47   48   49   50   51   52   53   54   55   56   57   >>  
| ft. in. | +-----------------------+---------------+ |Total length of engine.| 32 8 | +-----------------------+---------------+ |Width between frames. | 4 1 | +-----------------------+---------------+ |Wheel base, total. | 16 9 | +-----------------------+---------------+ |Diameter of cylinder. | 1 61/2 | +-----------------------+---------------+ |Length of stroke. | 2 31/2 | +-----------------------+---------------+ |Grate surface. | 25 sq. feet. | +-----------------------+---------------+ |Total heating surface. | 1,400 sq. ft. | +-----------------------+---------------+ |Weight empty. | 38 tons. | +-----------------------+---------------+ |Weight full. | 42 tons. | +---------------------------------------+ The high speeds--77 to 80 miles an hour--in view of which this stock has been constructed have, it will be seen, caused the elements relative to the capacity of the boiler and the heating surfaces to be developed as much as possible. It is in this, in fact, that one of the great difficulties of the problem lies, the practical limit of stability being fixed by the diameter of the driving wheels. Speed can only be obtained by an expenditure of steam which soon becomes such as rapidly to exhaust the engine unless the heating surface is very large. The tender, also fitted with wheels of 8 ft. 3 in. in diameter, offers no particular feature; it is simply arranged so as to carry the greatest quantity of coal and water. M. Estrade has also designed carriages. One has been constructed by MM. Reynaud, Bechade, Gire & Co., which has very few points in common with those in general use. Independently of the division of the compartments into two stories, wheels 8 ft. 3 in. in diameter are employed, and the double system of suspension adopted. Two axles, 16 ft. apart, support, by means of plate springs, an iron framing running from end to end over the whole length, its extremities being curved toward the ground. Each frame carries in its turn three other plate springs, to which the body is suspended by means of iron tie-rods serving to support it. This is then a double suspension, which at once appears to be very superior to the systems adopted up to the present time. The great diameter of the wheels has necessitated the division into two stories. The lower story is forme
PREV.   NEXT  
|<   20   21   22   23   24   25   26   27   28   29   30   31   32   33   34   35   36   37   38   39   40   41   42   43   44  
45   46   47   48   49   50   51   52   53   54   55   56   57   >>  



Top keywords:

diameter

 
wheels
 

heating

 
surface
 

constructed

 

division

 
springs
 

double

 

support

 

adopted


suspension

 
length
 

engine

 

Weight

 

stories

 

system

 

employed

 
Estrade
 

designed

 

carriages


greatest

 

quantity

 

Reynaud

 

common

 

general

 
Independently
 
points
 

Bechade

 
compartments
 

serving


appears
 

superior

 

necessitated

 

systems

 
present
 

suspended

 

extremities

 

running

 
framing
 

curved


carries

 
ground
 

speeds

 

caused

 

elements

 
relative
 

frames

 
Diameter
 

stroke

 

Length