FREE BOOKS

Author's List




PREV.   NEXT  
|<   3   4   5   6   7   8   9   10   11   12   13   14   15   16   17   18   19   20   21   22   23   24   25   26   27  
28   29   30   31   32   33   34   35   36   37   38   39   40   41   42   43   >>  
to the dealer's, examine these cameras for yourself and you will find it very easy to make a selection of a Premo that will be all that you could wish for in a camera. CANADIAN KODAK CO., Limited TORONTO, CANADA THE PREMO FILM PACK In our advertising, we often refer to Premos as being the smallest and lightest, the easiest to load and operate of all cameras. This is true, because the Premo Film Pack, with which most of our cameras are loaded, requires very little space when in use and itself is constructed upon such a simple, convenient principle. [Illustration] Packed flat, the Premo Film Pack can be loaded in Premo Film cameras by two operations. Just open back of camera and drop in pack--then close back and it's done. This is the easiest and quickest method of loading any camera. To prepare for the first exposure, simply pull out from the pack the paper tab marked "Safety Cover." Then to change films for successive exposures, merely pull out successive tabs. Upon pulling out the twelfth tab the pack is rendered light-tight, so that it may be safely removed in any light. With these advantages of easy loading and operating, the Premo Film Pack has another most important one--the removal of one or more films for development at any time. [Illustration: Easy to Load.] This feature is found in no other film system, and obviates the necessity of exposing all the films before any can be developed. And development has been made very simple. As we have said, anyone who follows directions in our instruction books can make good exposures, and if the exposures are right, development, heretofore, a bugbear to many amateurs, is certain with the Premo Film Pack Tank. All one has to do is to dissolve the developing powders in the tank, bring the solution to the proper temperature and put in the films. See pages 34-35. THE PREMO ADAPTER With the introduction of the Premo Film Pack it was found that a simple film pack holder or adapter, modeled upon the ordinary plate holder, would make it a simple matter to load any Premo plate camera with film packs. [Illustration: Premo Film Pack Adapter.] The Premo Film Pack Adapter has the general size and appearance of a plate holder. But it has a hinged back which can be easily opened, the film pack dropped in place, back closed, and the adapter then loaded into the plate camera just as an ordinary plate holder is. To make exposures, the s
PREV.   NEXT  
|<   3   4   5   6   7   8   9   10   11   12   13   14   15   16   17   18   19   20   21   22   23   24   25   26   27  
28   29   30   31   32   33   34   35   36   37   38   39   40   41   42   43   >>  



Top keywords:

camera

 

cameras

 

exposures

 

holder

 
simple
 

loaded

 

development

 

Illustration

 

successive

 

easiest


ordinary

 

adapter

 

Adapter

 
loading
 
instruction
 
directions
 

developed

 

exposing

 

system

 

feature


obviates

 

necessity

 

general

 
matter
 

introduction

 

modeled

 
appearance
 
closed
 

dropped

 
hinged

easily
 

opened

 
ADAPTER
 

dissolve

 
amateurs
 

heretofore

 

bugbear

 
developing
 

powders

 

temperature


proper

 
solution
 

marked

 

requires

 
operate
 

lightest

 

Premos

 

smallest

 
convenient
 

principle