is very light, and may be attached to a chair,
fence, the front board of an automobile, or other object which may be at
hand. The clamp jaws are padded with felt.
Price $ .75
PREMO PLATE HOLDER
Premo holders are made absolutely light-tight by a fully patented
light-lock. This device is shown in cut and is constructed of finely
tempered, non-corrosive metal with independently operating spring fingers
overlaid with a closely woven, specially prepared fabric. A slide can be
inserted cornerwise without admitting light to the plate. Fitted with
lacquered press-board slides that will not electrify, collect dust, crack
or split.
[Illustration]
3-1/4 x 4-1/4 $1.00
3-1/4 x 5-1/2 1.00
4 x 5 1.00
5 x 7 1.25
6-1/2 x 8-1/2 1.75
EASTMAN VIEW HOLDER
These holders are made with bottom flap, avoiding all danger of plates
falling out. They are strongly constructed, have patented spring finger
light-lock, and made to fit both models of the Eastman View. Slides are of
lacquered press-board.
5 x 7 $1.00
6-1/2 x 8-1/2 1.10
8 x 10 1.25
UNIVERSAL PLATE HOLDER
Constructed in the same manner as the Eastman View Holder but made to fit
Empire State and Premo View Cameras.
5 x 7 $1.00
6-1/2 x 8-1/2 1.10
8 x 10 1.25
11 x 14 4.00
14 x 17 5.00
R. O. C. PLATE HOLDER
This holder is of good construction and is adapted for use in the R. O. C.
View Camera only. It has pressboard slides.
5 x 7 $1.00
6-1/2 x 8-1/2 1.10
8 x 10 1.25
PLATE HOLDER AND ADAPTER SLIDES
LACQUERED PRESSBOARD
3-1/4 x 4-1/4 $ .20
3-1/4 x 5-1/2 .20
4 x 5 .20
5 x 7 .25
6-1/2 x 8-1/2 .30
8 x 10 .40
11 x 14 .60
HARD RUBBER.
5 x 7 $ .35
6-1/2 x 8-1/2 .50
8 x 10 .65
PLATE HOLDER KITS
Size Outside. Size of Opening for Plate. Price.
4 x 5 3-1/4 x 4, 3-1/4 x 4-1/4 $ .20
5 x 7 3-1/4 x 4, 3-1/4 x 4-1/4, 3-1/4 x 5-1/2,
4 x 5, 4-1/4 x 6-1/2 .25
6-1/2 x 8-1/2 3-1/4 x 4-1/4, 4 x 5, 3-1/4 x 5-1/2,
4-1/4 x 6-1/2, 4-3/4 x 6-1/2, 5 x 7 .30
8 x 10 4-1/4 x 6-1/2, 4-3/4 x 6-1/2, 5 x 7,
6-1/2 x 8-1/2
|