when worn.

The exhausting of spent steam is accomplished by means of slots,
I, sawed into the fronts of the cylinders at about 1/8 in. above
the lowest position of the piston's top at the end of the stroke,
at which position of the piston the valve rod drops into the
cutout portion of the cam and allows the valve to seat.

All the work on this engine, save turning the pistons, which was
done in a machine shop for a small sum, and making the flywheel,
this being taken from an old dismantled model, was accomplished
with a hacksaw, bench drill, carborundum wheel, files, taps and
dies. The base, Q, is made of a heavy piece of brass.

The action is smooth and the speed high. Steam is supplied by a
sheet brass boiler of about 3 pt. capacity, heated with a Bunsen
burner.
--Contributed by Harry F. Lowe, Washington, D. C.

** Magic Spirit Hand [2]

The magic hand made of wax is given to the audience for
examination, also a board which is suspended by four pieces of
common picture-frame wire. The hand is placed upon the board and
answers, by rapping, any question asked by members of the
audience. The hand and the board may be examined at any time and
yet the rapping can be continued, though surrounded by the
audience.

The Magic Wand, London, gives the secret of this spirit hand as
follows: The hand is prepared by concealing in the wrist a few
soft iron plates, the wrist being afterwards bound with black
velvet as shown in Fig. 1. The board is hollow, the top being made
of thin veneer (Fig. 2). A small magnet, A, is connected to a
small flat pocket lamp battery, B. The board is suspended by four
lengths of picture-frame wire one of which, E, is

[Illustration: Wax Hand on Board and Electrical Connections]

connected to the battery and another, D, to the magnet. The other
wires, F and G, are only holding wires. All the wires are fastened
to a small ornamental switch, H, which is fitted with a connecting
plug at the top. The plug can be taken out or put in as desired.

The top of the board must be made to open or slide off so that
when the battery is exhausted a new one can be installed.
Everything must be firmly fixed to the board and the hollow space
filled in with wax, which will make the board sound solid when
tapped.

In presenting the trick, the performer gives the hand and board
with wires and switch for examination, keeping the plug concealed
in his right hand. When receiving the board back, the plug is