ty, Mo.
** Fish Signal for Fishing through Ice [10]
Watching a fish line set in a hole cut in the ice on a cold day is
very disagreeable, and the usual method is to
[Illustration: Bell and Battery in a Box]
have some kind of a device to signal the fisherman when a fish is
hooked. The "tip ups" and the "jumping jacks" serve their purpose
nicely, but a more elaborate device is the electric signal. A
complete electric outfit can be installed in a box and carried as
conveniently as tackle.
An ordinary electric bell, A, Fig. 1, having a gong 2-1/2 in. in
diameter, and a pocket battery, B are mounted on the bottom of the
box. The electric connection to the bell is plainly shown. Two
strips of brass, C, are mounted on the outside of the box. The
brass strips are shaped in such a way as to form a circuit when
the ends are pulled together. The box is opened and set on the ice
near the fishing hole. The fish line is hung over a round stick
placed across the hole and then tied to the inside strip of brass.
When the fish is hooked the line will pull the brass points into
contact and close the electric circuit.
** Homemade Floor Polisher [10]
A floor polisher is something that one does not use but two or
three times a year. Manufactured polishers come in two sizes, one
weighing 15 lb., which is the right weight for family use, and one
weighing 25 lb.
A polisher can be made at home that will do the work just as well.
Procure a wooden box such as cocoa tins or starch packages are
shipped in and stretch several thicknesses of flannel or carpet
over the bottom, allowing the edges to extend well up the sides,
and tack smoothly. Make a handle of two stout strips of wood, 36
in. long, by joining their upper ends to a shorter crosspiece and
nail it to the box. Place three paving bricks inside of the box,
and the polisher will weigh about 16 lb., just the right weight
for a woman to use. The polisher is used by rubbing with the grain
of the wood.
--Contributed by Katharine D. Morse, Syracuse, N. Y.
** Tying Paper Bag to Make a Carrying Handle [10]
In tying the ordinary paper bag, the string can be placed in the
paper in such a way that it will form a handle to carry the
package, and also prevent any leakage of the contents. The bag
must be long enough for the end to fold over as shown in Fig. 1.
The folds are made over the string, as in
[Illustration: Stages in Tying a Bag]
Fig. 2. The string is then
|