s much as 1,100
indicated horse-power at one portion of the run. The finish and painting
of these engines is well considered, but the large coupled wheels give a
very high shouldered appearance, and as a type they are not nearly as
handsome as the single engines previously described.

From the Brighton to the South-Western Railway is but a step; but here a
totally different practice obtains to that adopted on most lines, all the
passenger engines having outside cylinders, where they are more exposed to
damage in case of accident, and, from being less protected, there is more
condensation of steam, while the width between the cylinders tends to make
an unsteady running engine at high speeds, unless the balancing is
perfect; but the costly crank axle, with its risk of fracture, is avoided,
and the center of gravity of the boiler may be consequently lowered, while
larger cylinders may be employed. On the other hand, inside cylinders are
well secured, protected, and kept hot in the smoke-box, thus minimizing
the condensation of steam. The steam ports are short, and the engine runs
steadier at high speeds, while with Joy's valve gear much larger cylinders
can be got in than with the link motion. Thus modern improvements have
minimized the advantages of the outside class.

The passenger engines for the fast traffic are of two types, the six-wheel
engines with 7 ft. coupled wheels, and the new bogie engines which are
being built to replace them. The former have 17 in. cylinders with 22 in.
stroke, and a pair of coupled wheels 7 ft. in diameter, the leading wheels
being 4 ft. diameter, and the wheel base 14 ft. 3 in. The grate area is
16.1 square feet, and the heating surface 1,141 square feet. The total
weight in working order is 33 tons. The chief peculiarity of this type of
engine consists in the boiler, which is fitted with a combustion chamber
stocked with perforated bricks, the tubes being only 5 ft. 4 in. long.
These engines are very expensive to build and maintain, owing to the
complicated character of the boiler and fire-box, but as a coal burning
engine there is no doubt the class was very efficient, but no more are
being built, and a new type has been substituted. This is an outside
cylinder bogie engine, with cylinders 181/2 in. diameter and 26 in. stroke;
the driving and trailing coupled wheels are 6 ft. 6 in. diameter, and the
bogie wheels 3 ft. 3 in. The wheel base to the center of the bogie pin is
18 ft. 6 in.;