V. WRESTLING PUPPETS.

[Illustration: FIG. 182.--Peg marked for cutting and drilling.]

The expenditure of a halfpenny, and a quarter of an hour's use of a pocket
knife, bradawl, and pliers, will produce a toy which is warranted to amuse
grown-ups as well as children. Wrestlers made out of clothes pegs may be
bought for a copper or two in the street, and are hardly a novelty; yet a
few notes on home production will not be a waste of space, as making is
cheaper, and much more interesting, than buying.

The clothes pegs used must be of the shape shown in Fig. 182, with a round
top. They cost one penny per dozen.

Drill holes through body and legs as indicated in Fig. 182. Cut the legs
from the "trunk,'" and whittle them to the shape of Fig. 183. The arms,
made out of any thin wood, are 2-1/4 inches long between centres of end
holes.

To get the best results the two arms and the four legs should be paired off
to exactly the same length.

[Illustration: FIG. 183.--Clothes-peg wrestlers.]

The neatest method of attaching the parts is to use small brass tacks,
which must, of course, be of somewhat larger diameter than the holes in the
body. Holes in arms and legs are a loose fit, so that the wrestlers may be
very loose-jointed, and the tacks must not be driven in far enough to cause
any friction.

Instead of tacks one may use wire passed through the parts and secured by
a bend or loop at each end. Wire has the disadvantage of entangling the
thread which works the figures.

When assembling is finished, bore holes in the centres of the arm pieces,
pass a piece of wire through, and twist it into a neat loop at each end. To
one loop tie 2 feet of strong thread (carpet thread is best), and to the
free end of the thread a large nail or hook. The other loop has 6 feet or
so of thread tied to it, to be worked by the hand. If the thread is stained
black, it will be practically invisible by artificial light.

The nail or hook is stuck under the edge of the carpet, or into some crack
or cranny which affords a good hold, and the wrestlers are worked by
motions of the hand. The funniest antics are produced by very slight jerks.

If the arms are set too close together the heads may stick between them, in
which case one must either flatten off the sides of the heads or insert
fresh arm wires of greater length. If a head persists in jamming against
the thread wire or getting under it and staying there, cut 1/2 inch off a
pin and