|Drawer front |
+--------------------+---------+-----------------------+---------------+
|2 pieces, 1" x 4" x | | |Top |
|12' flooring | 8 |3/4" x 3-1/4" x 36" | |
+--------------------+---------+-----------------------+---------------+
|2 pieces, 1" x 4" x | | |Doors |
|14' yellow pine | | | |
|ceiling | 10 |3/4" x 3-1/4" x 22-7/8"| |
+--------------------+---------+-----------------------+---------------+
|2 pieces, 1" x 4" x | | |Swing tops |
|12' flooring | 12 |3/4" x 3-1/4" x 24" | |
+--------------------+---------+-----------------------+---------------+
|1/2" x 6" x 12' | 2 |7-16" x 5" x 19-5/8" |Drawer slides |
| | 1 |7-16" x 5" x 13-1/2" |Drawer back |
| | 4 |7-16" x 4-3/4" x | |
| | | 13-1/2" |Drawer bottom |
+--------------------+---------+-----------------------+---------------+
|1/2" x 6" x 12' | 1 |7-16" x 4-1/2" x | |
| | | 13-1/2" |Partitions |
| | 3 |7-16" x 4-1/2" x 10" |Partitions |
+--------------------+---------+-----------------------+---------------+

TOOLS

Rule
Lead-pencil
Saw
Hammer
Steel square
Plane
1/2" Chisel and
Screw-driver

DIRECTIONS FOR MAKING

I Cutting and Squaring Stock--

Cut the stock only as needed, in the following order, and square up
according to the directions previously given.

1. Frame; rip the 1" x 8" x 12' piece for the frame material
2. Bottom
3. Ends and sides
4. Shelves
5. Top
6. Casing
7. Doors
8. Swing tops
9. Miscellaneous pieces

II Assembling--

Frame:

1. Check up the dimensions of the pieces squared up for the frame.

2. Lay out and cut the lap joints in the top side rails and frame posts,
as shown in the drawing.

3. Nail the frame together.

4. Test the corners of the frame with a steel try-square and brace it by
nailing, temporarily, several strips diagonally across the corners.

Bottom:

1. Cut seven pieces of flooring 32-1/2" long for the bottom and plane
off the groove of one piece.

2. Turn the frame upsid