FREE BOOKS

Author's List




PREV.   NEXT  
|<   317   318   319   320   321   322   323   324   325   326   327   328   329   330   331   332   333   334   335   336   337   338   339   340   341  
342   343   344   345   346   347   348   349   350   351   352   353   354   355   356   357   358   359   360   361   362   363   364   365   366   >>   >|  
r Prints to Glass.--First coat the glass with dammar varnish, or else with Canada balsam, mixed with an equal volume of oil of turpentine, and let it dry until it is very sticky, which takes half a day or more. The printed paper to be transferred should be well soaked in soft water, and carefully laid upon the prepared glass, after removing surplus water with blotting paper, and pressed upon it, so that no air bubbles or drops of water are seen underneath. This should dry a whole day before it is touched; then with wetted fingers begin to rub off the paper at the back. If this be skillfully done, almost the whole of the paper can be removed, leaving simply the ink upon the varnish. When the paper has been removed, another coat of varnish will serve to make the whole more transparent. This recipe is sold at from $3 to $5 by itinerants. A Liquid Cement for Cementing Leather, that Will Not be Affected by the Action of Water.--A good cement for splicing leather is gutta percha dissolved in carbon disulphide, until it is of the thickness of treacle; the parts to be cemented must first be well thinned down, then pour a small quantity of the cement on both ends, spreading it well so as to fill the pores of the leather; warm the parts over a fire for about half a minute, apply them quickly together, and hammer well. The bottle containing the cement should be tightly corked, and kept in a cool place. The Quickest and Best Way to Drill Holes for Water Pipes in Rough Plate Glass.--Use a hardened (file temper) drill, with spirits of turpentine and camphor to make the drill bite. A broken file in a breast brace will do good work if a power drill is not obtainable. A Recipe for Making Printers' Inks.--For black ink: Take of balsam of copaiba (pure), 9 ounces; lamp black, 3 ounces; indigo and Prussian blue, of each half an ounce; Indian red, 3/4 ounce; yellow soap (dry), 3 ounces; grind the mixture to an impalpable smoothness by means of a stone and muller. Canada balsam may be substituted for balsam of copaiba where the smell of the latter is objectionable, but the ink then dries very quickly. The red inks are similarly made by using such pigments as carmine, lakes, vermilion, chrome yellow, red lead, orange red, Indian red and Venetian red. A Cement to Stick White Metal Tops on Glass Bottles.--One of the best cap cements consists of resin, 5 ounces; beeswax, 1 ounce; red ocher or Venetian red in powder, 1 ounce. Dry the eart
PREV.   NEXT  
|<   317   318   319   320   321   322   323   324   325   326   327   328   329   330   331   332   333   334   335   336   337   338   339   340   341  
342   343   344   345   346   347   348   349   350   351   352   353   354   355   356   357   358   359   360   361   362   363   364   365   366   >>   >|  



Top keywords:

ounces

 
balsam
 
cement
 

varnish

 
leather
 
Canada
 

removed

 

Cement

 

Indian

 

yellow


copaiba

 

quickly

 
turpentine
 

Venetian

 
corked
 

hardened

 

spirits

 
camphor
 

broken

 

breast


temper

 

Quickest

 

Printers

 

Making

 

obtainable

 
Recipe
 

orange

 

chrome

 
vermilion
 

pigments


carmine

 

Bottles

 

beeswax

 

powder

 
consists
 

cements

 

mixture

 

impalpable

 

smoothness

 
indigo

Prussian
 
muller
 

similarly

 

objectionable

 

tightly

 

substituted

 

treacle

 

underneath

 
touched
 

wetted