3 Metering Pin Lock Wire .05
67-1 Strainer Body .30
67-502 Strainer Assembly 1.00
78-1 Throttle Shaft Washer .05
78-5 3/16 Lock Washer .05
79-8 Metering Pin Housing Space .20
80-3 Metering Pin Plug .15
81-16 Strainer Nut .15
82-1 Cotter Pin .05
83-2 Manifold Stud .05
84-3 Metering Pin Jet .35
95-1 Strainer Gauze .20
119-504 Dash Pot Plunger, Plunger
Rod and Washer Assem. .80
125-2 Metering Pin Spring Seat .05
158-2 Metering Pin Housing .15
167-502 Metering Pin Stem and
Wire Assembly .10
173-529 Metering Pin and Lock Wire
Assembly .45
REPLACEMENT FOR PREVIOUS MODEL NASH SIXES
The Model "S" Marvel Carbureter is interchangeable with the Model "K"
Marvel Carbureter, which was standard equipment on the 1922 and 1923
Nash Sixes of the early 691 series.
The previous series 681 Nash Sixes of 1921, 1920, and 1919, which were
equipped with the Model "E" Marvel Carbureter as standard equipment, can
be very greatly improved by the installation of the Model "S"
carbureter, exhaust damper body assembly necessary for same, and the hot
air stove assembly that goes with this installation.
Following is the complete Parts Price List of the Model "S" carbureter,
damper body assembly and stove parts for same. Notice is called to the
fact again that the damper body and stove parts are not needed on the
early 691 series of 1922 and 1923.
REPLACEMENT PARTS PRICE LIST For 1919-1922 Series 681 Nash Sixes
10-579 Carbureter and Heat Equipment
Complete $30.00
Consisting of the Following Parts:
Part No. Name Price
10-580 Carbureter Assembly 1 22.00
128-506 Damper Body and Stove
Assembly 8.00
15-16 10x24x3/8 F.H. Machine
Screw 1 $ .05
15-43 1/4x20x1/2 Std. Square
Head Set Screw 2 .05
15-53 5/16x18x2-1/2 Cap Screw 1 .05
15-54 3/8x16x1 Standard Square
Head Set Screw 2 .05
17-14 Exhaust Shut-off Valve
Connecting Rod 1 .10
17-15
|